MOBILE CRUSHER TRI1611 - MAKO

Frantumatore mobile, trituratore inerti

Mobile crusher for crushing and recycling of inert materials

THE CRUSHER
This mobile crushing machine from Franzoi is designed for recycling of inert materials sourced primarily from demolitions. It uses a crushing mechanism comprising two counter-rotary blade shafts. This new crushing method offers notable advantages:
High production rate even with earth, clay, wet, and bituminous materials, with inert materials rich in iron or wood.
Low maintenance costs due to the absence of on-board operator and the low level of wear granted by the new crushing system.
Desired particle size at discharge point offered by adjusting the distance between the shafts.
Adjustable shaft rotation speed (2-3 rpm).
Increased loading capacity provided by a suitable working surface (1.600 x 1.000 mm)
Reduced noise level
The mobile machine stands apart due to the state-of-the-art technology that guarantees the maximum performance in all of its functions:
- High transfer speed (4Km/h) - Fully equipped radio remote control - Common-rail EURO Stage III motor

KEY ADVANTAGES: No need for an operator - It can handle a wide variety of materials - Hydraulic weight adjustment - Adjustable shaft rotation speed - Fully controllable via radio remote control as well as fixed keypad - Hydraulic adjustment of magnetic separator height - Hydraulic adjustment of main conveyor height - Easy to operate - Out-of-gauge loads - Designed and manufactured entirely by FRANZOI

ELECTRONICS: In order to produce an innovative, cutting-edge product, the machine is fitted with a full electronic control system. A central control unit communicates with the motor control via the CAN-BUS line and displays all data onto a screen. This provides a full overview of the machine, with displays of any alarm states and, above all, the ability to configure the machine according to client needs.
The radio remote control and fixed keypad also communicate with the central control unit via the CAN-BUS system.
All Franzoi crushing machines can be equipped with a GPRS communication module that allows access to the machine via the Internet.

Therefore, the user can: Control every parameter - Locate the machine - Check operating hours - Check status signals and maintenance - Prevent access by unauthorised personnel - Facilitate technical support

OPTIONAL: Raise / Lower magnetic separator - Raise / Lower conveyor belt - Weighing system - Automatic greasing plant - GPRS - Dust suppression.

OPTIONALS

Asphalt shredder with removable special grid

The mobile shredder TRI1611 Franzoi metalmeccanica srl, can be a valid asphalt shredder.

Thanks to a special removable grid it is possible to obtain 0-40mm material in one passage.

For more information contact us using the form below. SEE THE ASPHALT SHREDDER PAGE

 

asphalt shredder

VIDEO

TECHNICAL CHARACTERISTICS

Dimensions  
Length 8.000 [mm]
Width 2.480 [mm]
Height 3.100 [mm]
Conveyor unload height 2.950 [mm]
Hopper length 3.000 [mm]
Hopper width 2.200 [mm]
Conveyor belt width 800 [mm]
Technical data  
Hopper 3.000 x 2.000 [mm]
Crusher inlet opening 1.600 x 1.000 [mm]
Max material dimensions 700 x 500 x 200 [mm]
Grinders distance variabile idraulicamente [mm]
Shredder speed 2 ÷ 13 [rpm]
Engine power 120 [kW]
Engine speen 2.200 [rpm]
Production 50 ÷ 150 [ton/h]
Operating weight of the unit 20.000 [kg]

INFORMATIONS REQUEST

Responsive image

INFORMATIONS REQUEST MOBILE CRUSHER TRI1611

Requested fields *

DISCLOSURE AND CONSENT ACCORDING TO LEGISLATIVE DECREE No.196/2003 (PRIVACY CODE)

In accordance with Article 13 of Legislative Decree 196/03, FRANZOI METALMECCANICA SRL informs you that any personal data provided by you to us, be in paper, magnetic media, electronic or telematic format, will be acquired and processed in full compliance with the Privacy Code. The data provided will be used exclusively to give feedback to the requests received. The provision of the data themselves is therefore optional. Should you refuse to provide this data and / or allow processing of same, it will be impossible for us to insert your details into our database and, consequently, we will be unable to establish a relationship with you or your business. The responsibility for the treatment of your personal data is assumed by: FRANZOI METALMECCANICA SRL Via G. Rossa, 18/A Z.I. 30037 SCORZÈ (Venice) ITALY. SEE PRIVACY POLICY